IP67 5V/48V 2.5kA/10kA CAT6+ RJ45 POE Ethernet Gigabit Surge Filter Explosion-proof SPD

Product Description

Summary

BS ELP RJ45 48V is Installation at LPZ 0_B-2 or higher, directly installed in the front near the equipment; according to IEC standard for CAT6 or Class E integrated wiring system; all the industrial Ethernet 10M, 100M, 1Gbit or higher network surge protection; the nominal current, continuous DC high voltage, to support the PoE network with power supply system. This surge arrester device use RJ45 interface protected by four pairs lines. Designed according to IEC 61643-21 GB 18801.21.

Technical Data

Type	BS ELP RJ45 48V
Nominal voltage [UN]	48V
Rated voltage (max. continuous d.c. voltage) [Uc]	48V
Rated voltage (max. continuous a.c. voltage) [Uc]	34V
Max. continuous d.c. voltage (pair-pair POE) [Uc]	57V
Nominal current [IL]	1A
Lightning impulse current (10/350) (L-PG) [Iimp]	0.5kA
Nominal discharge current (8/20) (L-PG) [In]	2.5kA
Total nominal discharge current (8/20) (L-PG) [In]	10kA
Voltage protection level at In (L-L) [Up]	≤ 190V
Voltage protection level at In (L-PG) [Up]	≤ 600V
Voltage protection level at In (L-L POE) [Up]	≤ 600V
Transmission frequency [fG]	250MHz
Insertion loss at 250MHz	≤ 2dB
Capacitance (L-L) [C]	≤ 165pF
Capacitance (L-PG) [C]	≤ 255pF
Max. data transmission rates [Vs]	> 1000Mbits/s
Operating temperature range [Tu]	-20°C...+70°C
Connection input/output	RJ45 shield socket
Pinning	1/2, 3/6, 4/5, 7/8
Mounting on	35mm DIN rail
Installation connector/Enclosure material	Ex(d)/Metal waterproofing;Auminum Enclosure
Earthing via	Earthing screw
Shield earthing	Indirectly via integrated spark gap
Waterproof protection	IP67
Test standards	IEC 61643-21; GB 18802.21; YD/T 1542
Ex approvals/Certification	Ex db IIC T6 Gb/CE(LVD,EMC), RoHS
Ordering information
Type	BS ELP RJ45 48V
Art.-No.	630 604
Packing unit	1pc(s)