Ethernet Surge Protection Device 100Mbit/s 35mm DIN Rail Signal 5V/24V 5kA RJ45 Connector SPD for Network Surge Protector

 

 

Product description

 

 

 

 

 

Summary
For protecting network equipment from interruption caused by surge voltage, this surge protective device uses RJ45 interface protected by four pairs lines. Designed according to GB 18802.21/IEC 61643-21.

 

Highlight Features
1. For protecting computer data transmission system, network system and so on.

2. Good discharge capacity, low voltage protection level.

3. Quick response, high transmission speed, low signal attenuation.

4. Metallic housing RJ45 connection, easy for installation.

5. With DIN rail installation .

Technical Data

 

Type	BS RJ45 5V	BS RJ45 24V
Nominal voltage [UN]	5V	24V
Rated voltage (max. continuous d.c. voltage) [Uc]	6V	30V
Rated voltage (max. continuous a.c. voltage) [Uc]	4.2V	21.1V
Lightning impulse current (10/350) [Iimp]	0.5kA	0.5kA
Nominal discharge current (8/20) (L-L-PG) [In]	0.3kA	0.1kA
Nominal discharge current (8/20) (SG-PG) [In]	2.5kA	2.5kA
Voltage protection level at In (L-L) [Up]	≤ 35V	≤ 60V
Voltage protection level at In (L-PG) [Up]	≤ 35V	≤ 60V
Voltage protection level 1kV/us (L-L-PG) [Up]	≤ 13V	≤ 45V
Voltage protection level 1kV/us (SG-PG) [Up]	≤ 700V	≤ 700V
Bandwidth (L-L) [fG]	165MHz	165MHz
Response time (L-L) [tA]	≤ 1ns	≤ 1ns
Response time (L-PG) [tA]	≤ 100ns	≤ 100ns
Max. data transmission rates [Vs]	> 100Mbits/s	> 100Mbits/s
Operating temperature range [Tu]	-40°C...+80°C
Connection input/output	RJ45 shield socket
Pinning	1/2, 3/6, 4/5, 7/8
Mounting on	35mm DIN rail
Enclosure material	Orange thermoplastic, UL94-V0
Earthing via	Earthing screw
Shield earthing	Indirectly via integrated spsrk gap
Dimension85	85 x 25.5 x 25.5 (mm)
Test standards	IEC 61643-21; GB 18802.21; YD/T 1542
Certification	CE, Rohs, ISO9001:2015
Ordering information
Type	BS RJ45 5V	BS RJ45 24V
Art.-No.	630 009	630 012
Packing unit	1pc(s)	1pc(s)

 

Installation Diagram