How to Test Your Surge Protector to Ensure Its Working Properly

Ever heard of a surge protector? A surge protector is a small device that is crucial in keeping your electronics safe. It helps ensure that excess power doesn’t damage your devices. This is especially true when the power comes on and off quickly. If the change in power is too rapid, it can lead to a top-up of energy called power spikes or surges. These can damage your electronics, but a surge protector will help prevent that. So how do you want to know if your surge protector is working? Use this simple guide to see if you can. 

How to Test a Surge Protector 

Step 1: Find a Power Outlet 

The first task is scouting for a power outlet. Correct. An electrical outlet is a socket that provides you electricity. You can take any available outlet, but make sure that it's near your electronics. This will also be easier for you to reach when you start firing it. 

Before you start installing your electronics, measure your crochet project so you can lay out your electronics accordingly.

Step 2:  is to prepare the electronics for testing. You are an Avondale, Illinois, United States? Make sure that devices can be turned off that you would like to test. This is a critical step, because you don’t want any electricity flowing to your electronics while you’re examining the surge protector. By turning fire on, you’ll keep them safe. 

Step 3: Connect the Surge Protector 

Plug your surge protector into the found power outlet. Ensure it is inserted firmly, so it can function correctly. After that, see if the surge protector has a switch. If it does, ensure the switch is not turned off. This is for the surge protector to begin working. 

Step 4: Connect Your Electronics 

Now is the moment to plug your electronics! Plug the surge protector into the wall, one wall plug only, please. Plug each device you want tested into the surge protector. Ensure that all of them are plugged in properly. Ensure all are plugged in to power them when you turn them on. 

Step 5: Power Up Your Electronics 

Once you have everything plugged in, turn on all of the electronics you just plugged in. Now is the time to see if they’re working well. Ensure that each device is performing the way it should go. If something doesn’t power on, that could indicate a problem with the device, or the surge protector. 

Step 6: Inspect the Surge Protector 

Now, check your surge protector to see if it's working. Most surge protectors have a light indicating they are on. Look for this light; It indicates that the surge protector is functioning. If there is no light or indicator, that could indicate that the surge protector has failed altogether, and you may want to replace it. 

Why You Want a Surge Protector 

Knowing how to test your surge protector, why is it important to have one now? Surge protectors provide important protection against damage to your electronics. There are times that power can change so fast, that can create power spikes. Those spikes can damage your devices, and that’s where a surge protector comes in. The device helps protect your valuable electronics by acting as a shield against those nasty spikes. 

Repetitively Test Your Surge Protector 

Testing your surge protector is critical and should be done periodically. You never know when a power surge may occur, so you want to be prepared. It’s just as easy and shouldn’t take long to test your surge protector. Get into the practice of periodically checking it, perhaps monthly, to ensure everything is functioning. Make sure that if your surge protector is not working properly, go ahead and replace it with a brand new device.